Water Softener Troubleshooting is not that difficult, however if having a hard time doing it, seek Professional help
Water softener troubleshooting is a great way of identifying the problem when
something goes wrong with your water softener. In this article we will identify
some of the most frequently asked question on when to troubleshoot a water
softener. Now let the mission begin.
There are several signs tell-tale signs to watch out for. You will notice that there are water spots on glasses or a film on ceramic surfaces. Soap won’t lather as profusely as well as it will leave an unpleasant scum. If you wash your hair, it may feel sticky after you shampoo it and its natural shine is not any more recognizable. This water softener technical guide will help you get the most of your model.
What is the next thing that I should do if my system isn't working?
Sometimes the reason why your system may not work is because salt is becoming encrusted in the brine tank, so checking the brine tank is good place to start your troubleshooting process. If you notice a crust, simply wash it away using soap and water, and rinse completely. Salt can usually form a crusted plug at the connection between the mineral tank and the resin tank. If this occurs, simply clean it out. Iron contents on the bead bed can hinder a water softener’s capability if you know your water has a high iron content, beware of this. If this causes the system to stop working, use an iron-removing product to clean the bed.
I’m not getting soft water, my salt storage tank is full of water and while the unit is in soft water cycle, water is running to the drain. Is this just ok?
This is definitely not good. This is the results of no brine draw. To troubleshoot a water softener, you ought disassemble and clean the nozzle and venturi. Using a soft tooth brush would be helpful. Now you have to clean the parts with mild soap and warm water using the soft toothbrush. Rinse completely.
If the parts are iron coated use a resin bed cleaner. Your valve drain hose also may be plugged. Check if there are kinks, sharp bends or blockages in the hose.
Another possible reason might be a leak between the valve and resin tank assembly. Replace the tanks’ O-valve rings with a simple kit. This is another helpful water softener troubleshooting guide.
I’m not having a soft water and my salt level isn’t dropping. What should I do?
Sometimes a salt bridge can form in the brine tank that would cause a space between the water and the salt due to high humidity or from the use of the wrong kind of salt. The salt won’t dissolve in the water to make brine and the resin bed does not regenerate.
Use a broom handle and carefully push down on the salt in several areas to loosen the salt bridge. Avoid using any sharp objects or you could puncture the tank. Then you have to make sure that you select and program a regeneration schedule with the timer. This is another instance that you can look for a solution to water softener problems.
Will the high content of sodium chloride corrode my pipes?
PH, O2 content, ammonia and chloride, are factors that can cause corrosion however do not affect the softening process. What you need to watch out for is the increased potential for soft water to leach heavy metals from the pipes; this happens mostly if water is left standing in them overnight. You need to inform the Environmental Protection Agency to check the heavy metal content of your water if you're concerned.
Is it possible to have hard water sometimes?
If there is an experience of hard water, troubleshoot water softener to make sure your time setting is correct. Regular regeneration schedule needs to be set. You may be using more water than what is originally expected of, so it is better to check the regeneration chart to make sure you’re performing that process often enough.
Or another reason could be leaky faucet or toilet valve, which can waste hundreds of gallons of water in just a few days. This problem should be attended right away.
Trying to fix a water softener could sometimes be timely, but it’s well worth the effort to do it yourself instead of calling in a repairman that could cause you a lot of money. Bust just in case you really can’t’ figure things out, this would be the best time to seek help.
Site Map | Articles | Blog | Back to top